Using Spray Adhesive

Spray adhesive:

Test spray on a scrap surface before applying to final work. Make sure nozzle is not clogged and that adhesive is spraying evenly.

Spray 6 to 8-inches away from object at a 90-degree angle in both directions for full coverage.  Spray slowly and evenly.

Once sprayed, let dry one minute or until tacky, then make bond.

Shake can well before use.  Make sure nozzle is pointed at object to be adhered. 

Performs best when applied at room temperature. Let dry for 5 minutes

Use a solvent based cleaner to remove and clean up any unwanted spray adhesive.

Use in a well-ventilated area.  Do not store at temperatures above 120-degrees Fahrenheit.  Avoid skin and eye contact.